Skip to main content Skip to footer

Knowledge Base

Products
Search Term

Default Programming For The T10/T10C 2D Scanner

Published: May 23, 2013
Updated: October 3, 2017
In this article we will explain how to restore the 2D scanner to default programming and resetting factory defaults for the T10C. Additional programming might be needed for your specific barcodes and should be done with the included Easyset software. More information on Easyset can be found in related articles below. You should only need to restore factory defaults if you are having an issue with the 2D scanner scanning an actual barcode. 1. First download the 2D Scanner Default Programming PDF linked to this article. 2. Print the PDF.
3. To activate the scanner push and hold the 2D scanner button on the bottom of the tablet. 4. Scan both the First Scan: Optimal Default Settings and Second Scan: Enable Extra Symbologies. 5. Now your scanner is programmed with its default settings. Still having trouble?
1. To activate the scanner push and hold the 2D scanner button on the bottom of the tablet. 2. Scan the Reset Factory Defaults barcode at the bottom of the PDF. 3. After scanning the Reset Factory Defaults barcode your 2D scanner may not activate as you need to reinstall the 2D scanner driver again. ***Please see related article of installing the driver if you need help performing this task*** 4. Scan both the First Scan: Optimal Default Settings and Second Scan: Enable Extra Symbologies. 5. Now your scanner is programmed with its default settings.
Attachments: Download file 1